The list of honda legend

First generation (KA1-KA6, 1985-1990)

First generation
Overview
Also called	Acura Legend
Production	1985–1990
Assembly	Saitama, Sayama, Japan (Honda Sayama Factory) Cowley, Oxfordshire, England (HUKM)
Body and chassis
Layout	Front-engine, front-wheel drive layout
Related	Rover 800
Powertrain
Engine	2.0 L C20A V6 (Japan) 2.0 L C20AT turbo V6 (Japan) 2.5 L C25A V6 2.7 L C27A V6
Transmission	5-speed manual 4-speed automatic
Dimensions
Wheelbase	Sedan: 2,761 mm (108.7 in) Coupe: 2,705 mm (106.5 in)
Length	Sedan 4,811 mm (189.4 in) '86-'88 Sedan 4,841 mm (190.6 in) '89-'90 Sedan (Japan): 4,689 mm (184.6 in) Coupe: 4,775.2 mm (188 in)
Width	Sedan 1,735 mm (68.3 in) '86-'88 Sedan 1,750 mm (68.9 in) '89-'90 Sedan (Japan): 1,694 mm (66.7 in) Coupe: 1,745 mm (68.7 in)
Height	Sedan: 1,389 mm (54.7 in) Coupe: 1,369 mm (53.9 in)

The first-generation Legend, introduced to Japan October 22, 1985, was the first production Honda vehicle to offer only a SOHC V6 engine worldwide. The introduction of the Legend also coincided with the launch of a new dealership sales channel in Japan, called Honda Clio. The Legend was a result of a joint venture with Britain's Austin Rover Group called Project XX that started in November 1981 with the Austin Rover-Honda XX letter of intent signed by the two companies to replace the Rover SD1 and to provide a luxury vehicle for Honda, and was codenamed as HX. The Rover Company had a long established reputation as a luxury car maker in the United Kingdom and Europe, demonstrated with the Rover P5 and Rover P6, and Honda wanted to introduce a luxury car for the Japanese, European and North American markets. Rover also wanted to return to the American market when previously they had reportedly sold only 1,500 cars in 1971, and a brief return in 1980, selling 800 Rover SD1s by offering the Sterling which was also a result of the ARG-Honda partnership.^[1] The development work was carried out at Rover's Canley, Coventry plant and Honda's Tochigi Prefecture development centre.
Honda and British Leyland/Rover agreed that Legends would be built in Plant Oxford for the British market.^[2] However, few UK built Legends passed Honda's quality control, and many simply ended up being used as in-plant transport.^[2] In the end, only 4,409 Legends were built in the UK, from 1986 until 1988.^[3] All US-market Legends were built in Japan.

Japanese market

Honda wanted to expand its model range above the Honda Accord, and offer a premium level sedan that would appeal to wealthy middle-aged customers who were the traditional buyers of the Toyota Crown, Mazda Luce, and Nissan Cedric/Gloria. In 1981 Honda had introduced a luxury level version of the Accord, called the Honda Vigor, but realized that they needed to manufacture a larger, more exclusive sedan with similar dimensions to the Crown, Luce, Cedric, and Gloria. When the Legend was introduced worldwide, the optional equipment list was minimal as commonly identified equipment regarded as luxury in nature was included as standard equipment, leaving the only option the choice between a manual or automatic transmission.
The major mechanical difference between the Legend and the Toyota, Mazda and Nissan sedans was that the Legend was front wheel drive, which Honda stated was "quite simply the most logical means to the ends the engineers desired: a true luxury car with a low, aerodynamic hood; a spacious interior with a nearly flat floor, and the superior traction that results from placing the engine and drivetrain transversely over the drive wheels." This provided the Legend with a front-end heavy 63/37 front to rear weight distribution ratio, similar to the NSU Ro 80.^[4] The ride was engineered to appeal towards the luxury car market and not necessarily towards the performance market, and the front to rear weight distribution ratio reflected this goal. Efforts to minimize torque steer were achieved by the half shafts and the angles of the joints at the ends of those shafts being equalized, helping the Legend to accelerate in a straight line.
The Japanese-spec Legend was offered with three trim levels; the V6Xi with the 2.5 L C25A V6 engine, with the slightly shorter and narrower V6Gi and V6Zi using the 2.0 L C20A V6. The V6Gi had the same level of equipment and luxury features as the V6Xi, whereas the V6Zi had reduced content and a lower price. The V6 engines were available with electronic, multi-port sequential fuel injection Honda called Programmed Fuel Injection, or PGM-FI and a variable length intake manifold on the smaller 2.0 L V6. The larger 2.5 L engine was upgraded to the C27A 2.7 L displacement for model year 1988 and added the variable length intake manifold as a major engine improvement. The engine benefited from Honda's successes with its endeavors in Formula One racing in 1964, and Honda's F1 racing car, the Honda RA271. Transmission selections were either a four speed automatic transaxle with a computer controlled lockup torque converter, or a five speed manual transaxle.
In order for the sedan to comply with Japanese vehicle size requirements and reduced tax liability, the car with the 2.0 L V6 was slightly shorter and narrower for Japanese buyers by reducing the extension of the front and rear bumper covers, and reducing the overall width to 1,695 mm (66.7 in). This also offered an alternative to the traditional Crown and Cedric/Gloria customer base due to the sedan being in the smaller size classification and reduced tax liability but with a comparable level of luxury equipment found in the larger cars, and the same amount of interior space due to the front wheel drive powertrain, with a wheelbase advantage of 30 mm (1.2 in) over the Cedric / Gloria and Crown. To address the issue of durability, the Legend was manufactured as a Monocoque sedan instead of a four door hardtop, a bodystyle still offered at the time by Toyota and Nissan on the Crown and Cedric/Gloria. The slightly smaller bodystyle also allowed the Legend to compete with the upscale Toyota Cresta and Chaser and the Nissan Laurel.
The Legend offered many Honda "firsts", such as a driver side airbag, vehicle speed sensitive power assist rack and pinon steering, anti-lock brakes, seat belt pre-tensioners with Emergency Locking Retractors (called E.L.R.), a choice of 100% wool or cloth moquette upholstery, and "TCS" Traction control, the first car to use traction control on a front wheel drive vehicle. Attention was given to make sure the Legend was quiet, so Honda used computer simulation using NASTRAN, a stress analysis program created by NASA, helping the car achieve a drag coefficient of 0.32 and an interior noise level of 63dB (measured while the vehicle was travelling at 100 km/h (62.1 mph) using a manual transmission in 5th gear), and by using triple seals around the tops of door openings.
The Legend was introduced with a double wishbone suspension for the front wheels, and a modified Chapman strut with trailing arm rear suspension Honda called "RF (Reduced Friction) Strut Rear Suspension" with progressive rate rear coil springs that stiffen as they compress to combine smooth ride and good handling. The rear coil spring was separate from the strut and positioned so that vertical pressure was supported by the lower control arm. The term Reduced Friction referred to the minimizing of forces that create friction in the shock absorbers, providing more efficient damping for the full suspension stroke. The rear suspension was upgraded to double wishbone starting with the 1988 model year worldwide.
Notable owners of the first year Legend were Soichiro Honda the founder of Honda, Satoru Nakajima, Tyrrell Racing F1 driver in 1990, and Ayrton Senna. The Legend V6Xi was used as the pace car for the Suzuka Circuit for 1986.

"Wing Turbo" version

In 1988, Honda upgraded the C20A V6 engine used exclusively in the KA5 series Legend with a variable geometry turbocharger calling it the "Wing Turbo" Japanese TV commercial to address the modest power available from the previous engine with variable length intake manifold used in earlier models. The turbocharger compressor housing had four vanes made from heat resistant Inconel alloy surrounding the turbine wheel on the air intake side that would fluctuate based on engine load and transmission gearing above 2,000 rpm to allow for increased airflow into the engine as needed. The turbo compressor could generate as much as 450 millimetres of mercury (8.7 psi) of boost, and was paired with a water cooled intercooler installed inside the intake plenum between the cylinder banks to produce 140 kW (190 PS; 188 bhp) net at 6000 rpm and a maximum torque of 24.6 kg·m (241 N·m; 178 lb·ft) at 3,500 rpm.^[5] Honda Legend V6 turbo idling
According to an excerpt originally printed by Automotive Engineering dated January 1989 "The movable wings are positive pressure- and vacuum-operated, their angle changes are controlled by an eight-bit 36-kilo byte computer that also manages fuel injection. Positive pressure to the wing actuator is supplied by the turbo's supercharge pressure, controlled by a frequency solenoid valve, and negative pressure is generated by intake vacuum and accumulated in a reservoir which is also solenoid controlled. The CPU is fed signals including boost pressure, intake temperature, coolant temperature, throttle opening, engine rpm, and vehicle speed. The Wing Turbo is not fitted with a conventional wastegate.
On idling and steady-state cruising that do not require supercharging, the movable flags--or wings--which are fully opened, allow exhaust gas to enter the enlarged nozzle area and pass through the turbine smoothly with little resistance. At the beginning of full acceleration, the wings close fully, reducing the nozzle area through which accelerated gas enters and strikes the turbine blades forcefully, gaining boost quickly. When maximum boost is obtained, the movable wings begin to close gradually, until the vehicle reaches a desired cruising velocity whereby the wings open fully. The nozzle area varies continuously according to operating and load conditions."^[6]
The turbo was installed just above the automatic transmission unit; a manual transmission was not offered. This engine was only offered in Japan using the more compact sedan bodystyle, labeled as "2.0 Ti Exclusive" and "2.0 Ti". The engine was used for just two years, due to the introduction of the second generation Legend in 1990 with the much larger C32A V6, and as such Wing Turbo sedans are extremely rare. Much of the research on this engine contributed to the VTEC C30A V6 engine used in the 1990 Honda NSX. The Legend Turbo can be identified as by a "TURBO" badge attached to the front grille on the bottom right hand side and a "V6Ti" rear badge.

North American market

See Acura Legend and Acura RL for information on the North American model.

European market

The Honda Legend was introduced for the 1987 model year and was virtually identical in equipment offered and vehicle dimensions to the North American model, with one trim designation called the V6-2.5i. This means very few options were available other than the choice of transmission, and an air conditioning system identical to the North American version. The Europeans were offered an optional "Special Equipment Pack" that offered cruise control, aluminium alloy wheels, a driver's seat with power lumbar support, height, fore/aft and reclining adjusters, adjustable rear headrests, a 4 speaker stereo system provided by Philips and headlight wipers. Front and rear mud flaps were standard in undisclosed countries but not all. The radio volume control rocker switch and preset radio scan button installed on the instrument binnacle was not offered.

Legend coupe and other changes

Honda Legend coupe

The Legend Coupe was introduced February 6, 1987, which shared the double wishbone suspension and powertrain setup from the moderately improved sedan for the 1987 model year. Incidentally, the Japanese coupe was both longer and wider, which increased its tax liability, yet it had a shorter wheelbase by 2.2 in (56 mm).
Starting with the introduction of model year 1988, the trim level "Exclusive" was introduced, offering genuine wood trim provided by Tendo Mokko on the dashboard and center console with a very large selection of available wood type and hues to choose from, automatic headlights, headlight washer/wipers, separate rear passenger climate control, and chrome-plated power folding mirrors and door handles with infrared remote keyless entry. October 14, 1988 saw a minor restyle offered for the interior and dashboard, to provide a more luxurious appearance in comparison to the Nissan and Toyota uplevel sedans the Legend was competing with. Due to the success Honda had with the Legend, it served as an inspiration for many vehicles from multiple manufacturers, including the Subaru Legacy with which it shares many visual resemblances and dimensions both inside and out.

Engine specifications

Engine	Displacement (cc) / bore×stroke	Horsepower	Torque
C20A V6 SOHC 24 valve PGM-FI	1,996cc / 82.0×63.0	145 PS (107 kW; 143 hp) at 6,300 rpm	172 N·m (127 lb·ft) at 5,000 rpm
C20A turbo V6 SOHC 24 valve PGM-FI	1,996cc / 82.0×63.0	190 PS (140 kW; 190 hp) at 6,000 rpm	241 N·m (178 lb·ft) at 3,500 rpm
C25A V6 SOHC 24 valve PGM-FI	2,493cc / 84.0×75.0	165 PS (121 kW; 163 hp) at 6,000 rpm	211 N·m (156 lb·ft) at 4,500 rpm
C27A V6 SOHC 24 valve PGM-FI	2,675cc / 87.0×75.0	180 PS (130 kW; 180 hp) at 6,000 rpm	226 N·m (167 lb·ft) at 4,500 rpm

Second generation (KA7/KA8, 1990-1995)

Second generation
Overview
Also called	Acura Legend Daewoo Arcadia
Production	1990–1995
Assembly	Saitama, Sayama, Japan (Honda Sayama Factory)
Body and chassis
Layout	Front engine, front-wheel drive layout
Related	Honda Accord Honda Inspire Honda Vigor Honda Ascot
Powertrain
Engine	3.2 L C32A V6
Transmission	4-speed automatic 5-speed manual 6-speed manual
Dimensions
Wheelbase	Coupe: 2,830 mm (111.4 in) Sedan: 2,911 mm (114.6 in)
Length	Sedan: 4,950 mm (194.9 in) Coupe: 4,890 mm (192.5 in)
Width	1,811 mm (71.3 in)
Height	1991-92 Coupe: 1,359 mm (53.5 in) Sedan: 1,400 mm (55.1 in) 1993-95 Coupe: 1,364 mm (53.7 in)

The second generation model was introduced October 24, 1990, and continued to offer both a sedan and coupé. The Rover 800 was not updated to the new platform, and instead continued with the old XX platform. In Japan, this Legend was also known as the "Super Legend" due to the much larger 3.2 C32A engine, which was now the only engine offered in the Legend. The Type I engine was rated at 215 PS (158.1 kW; 212.1 bhp), and the Type II was rated at 235 PS (172.8 kW; 231.8 bhp) and included with the touring system. This Legend benefited from much of the research and testing done for Honda's new mid-engined high performance sports car, the Honda NSX, and the Legend was used as a test platform for new NSX technologies and research. Honda introduced a passenger side airbag on this model, and used off-set collision testing to improve collision performance and safety.
Trim level designations were changed to "Alpha" for the top level vehicle, and "Beta" for the lower grade. No other trim levels were offered. The "Alpha" was very well equipped, offering ABS, leather or 100% wool moquette upholstery, projector beam headlights, and dual-zone air conditioning.
The customer base served by the slightly smaller first generation Legend was now offered the completely revised CB5 series Honda Vigor and Honda Inspire sold at different Japanese Honda retail sales locations Honda Clio and Honda Verno. The business practice of offering the previous generation Legend in two sizes so that it could comply with Japanese dimension and engine displacement regulations was ceded to the Inspire and Vigor, where both vehicles were offered in two versions so as to comply with the regulations, and offer Japanese buyers with more choices.
The Japanese Domestic Market version of the 1990 Legend (2nd generation) was the second vehicle offered with a navigation system called the Electro Gyrocator (first being the 1981 Honda Accord and Vigor), although it was not satellite-based and instead relied on a gas gyroscope. September 29, 1992 saw an upgrade to the "Alpha" trim level, called the Touring Series, which added the Honda Progressive Damper suspension system, and included upgraded calipers for the front and rear disc brakes, and increased the wheel size to 16 inches. A Luxman premium sound system was added to the options list.The prefectural police department of Aomori used "Beta" sedans with the Type II engine for traffic monitoring.
American actor Harrison Ford did commercials in Japan for the Legend.

Honda Legend Alpha Touring coupe (Japan)  Honda Legend coupe (Europe)

Daewoo Arcadia

Daewoo Arcadia (S. Korea)

The second-generation Legend was also manufactured by Daewoo in South Korea from 1994 to 1999 under the name of Daewoo Arcadia (ko:대우 아카디아 ), for the southeast Asian market, replacing the Daewoo Imperial.^[7] During this period, Honda had a loose alliance with Daewoo, and the Arcadia was larger than Hyundai Grandeur, and Kia Enterprise competitors. Daewoo Motors (GM Korea's predecessor) sold more than 800 vehicles. In 1992, Japan's Honda and technology partnership with Daewoo, the Arcadia was essentially the base level Legend. At the time of the Arcadia’s introduction, it was the largest engine, with a 220 horsepower V6 3.2 C32A, and the starting price was also high 41.9 million won. ABS, dual airbags, safety belt pre-tensioners, and the most advanced car safety features at the time, commensurate with a focus on protecting the passengers. Some of the features included driver's seat position memory function and front heated seats, push-button door opening and closing devices, automatic climate control air conditioning. After the acquisition of Ssangyong and Daewoo Motors, Daewoo cars entered with the Daewoo Chairman and remaining stock of Arcadia sedans were price reduced, with the Arcadia ending production in December of that year.

Third generation (KA9, 1995-2004)

Third generation
Overview
Also called	Acura 3.5RL
Production	1995–2004
Assembly	Saitama, Sayama, Japan (Honda Sayama Factory)
Body and chassis
Layout	front engine, front-wheel drive layout
Related	Honda Accord (USA-spec) Honda Inspire Honda Saber
Powertrain
Engine	3.5 L C35A V6
Transmission	4-speed automatic 6-speed manual
Dimensions
Wheelbase	114.6 in (2,911 mm)
Length	1996-1998:195.1 in (4,956 mm) 1999-2001:196.6 in (4,994 mm) 2002-2004:196.7 in (4,996 mm)
Width	1996-1998:71.3 in (1,811 mm) 1999-2001:71.4 in (1,814 mm) 2002-2004:71.7 in (1,821 mm)
Height	1996-1998:54.5 in (1,384 mm) 1999-2001:56.5 in (1,435 mm) 2002-2004:54.5 in (1,384 mm)

The third generation Legend appeared February 14, 1996, continuing the Honda tradition of front wheel drive, and increasing the engine displacement to 3.5 L with the horsepower remaining at 215 PS (158.1 kW; 212.1 bhp). The actual Honda internal platform code for this vehicle is E-KA9. In an attempt by Honda to dispute the call for the Legend to be offered with a V8 to be considered an international premium level luxury car, this generation had a wheelbase that compared to the Infiniti Q45 at 2,830 mm (111.4 in) with a length at 5,056 mm (199.1 in), and the Lexus LS at 2,850 mm (112.2 in) wheelbase and 4,996 mm (196.7 in) length. The Legend also had very similar dimensions to the front wheel drive, V8 sedan Mitsubishi Proudia which was sold only in Japan. In Japan, the Legend continued to compete with the Toyota Crown, the Mitsubishi Debonair, the Mazda Luce, and the Nissan Cedric and Gloria at the executive sedan segment.
The trim level "Exclusive" returned as the upper level car, with the standard grade vehicle known as "Euro", with the more performance tuned suspension.The wood trim used was more upscale for the "Exclusive" vehicle with a lower grade wood used on the "Euro". Both vehicles were very well equipped. The instruments used were simplified from previous versions, but 100% wool moquette upholstery was still offered, along with optional leather. Honda's internet-based navigation system Internavi was introduced with this generation on Japanese domestic vehicles. The Luxman premium sound system was still available. The styling was said to more closely resemble the Mercedes-Benz E-Class and a transponder key security system was offered. Starting with this generation, cabin air filters (also known as pollen filters) were installed as standard equipment and are located behind the glove compartment internationally.
September 21, 1998 saw a minor styling change, with the front grille cutting into the front bumper, providing a more prominent front grille. Emphasis was increased on providing a luxurious sense of style, both inside and out. Side impact airbags now complemented the dual front airbags as standard equipment. The steering wheel can be automatically adjusted based on the position of the drivers seat, therreby optimizing a safe distance between the driver and the airbag installed in the steering wheel.
September 24, 1999 saw the engine meet emissions regulations to comply with California LEV requirements.
June 19, 2003 saw the interior updated, and maple wood was offered for interior decoration. Electro-luminescent instruments were offered, as well as a higher grade of leather interior.
The third-generation Legend was released in 1996, and the third-generation model was offered as a sedan only. A mid-term facelift came in 1999. The Legend went on sale in Australia starting with the 1997 model year.
In the USA market, when the Legend coupe was discontinued, they were offered the Acura CL two-door coupé that was based on the American market Honda Accord coupé, so as to continue offering a premium vehicle in this niche.

North American model

See Acura Legend and Acura RL for information on the North American model.

Fourth generation (KB1, 2004-2012)

Fourth generation
Overview
Also called	Acura RL
Production	2004-2012
Assembly	Saitama, Sayama, Japan (Honda Sayama Factory)
Body and chassis
Layout	Front-engine, four-wheel drive layout
Related	Honda Accord (USA-spec) Honda Odyssey (North America) Honda Inspire Honda Elysion
Powertrain
Engine	2005-08: 3.5L J35A 290 hp (220 kW) 2009: 3.7L 300 hp (220 kW)
Transmission	5/6-speed automatic with sequential sport shift
Dimensions
Wheelbase	2005-09: 110.2 in (2,799 mm)
Length	2005-08: 193.6 in (4,917 mm) 2009: 195.8 in (4,973 mm)
Width	2005-9: 72.7 in (1,847 mm)
Height	2005-08: 57.1 in (1,450 mm) 2009: 57.2 in (1,453 mm)

The swoopier, shorter fourth-generation Honda Legend was launched on October 7, 2004 and became Japan's Car of the Year for 2004–5, marking the fourth time in five years that Honda has taken the award. Its reduced dimensions over the third generation model seem to suggest a return to what made the Legend so popular with the first generation, being a top level sedan that offered something different from its competitors. The 2011 model marks the 25 year anniversary of Honda Legend production.
In an attempt to address market driven requests that the Legend needed to be a rear drive sedan with a V8 engine, Honda introduced four wheel drive technology on the Legend, called "Super Handling All-Wheel Drive" SH-AWD, which earned Honda the Japan Car of the Year, and Mosuto 2005 Annual RJC technology of the Year award. The Legend is only available with the four wheel drive powertrain, however, the all wheel drive system is optional on the North American Acura TL (The TL is not sold in Japan). Due to continuous product improvement efforts over past generations, the series CP3 North American Honda Accord (Honda Inspire in some markets) shares wheelbase, length, width and engine displacement almost exactly with this generation Legend, with a reduced price in many international markets. The Legend does have a higher level of standard features and optional equipment but not by much.
Select-Shift was introduced on the 5 speed automatic transmission. The newly designed J35A 3.5 L V6 was changed from a 90 degree "V", in use since the first 1986 C25A V6 engine, to a 60 degree, and added VTEC to improve efficiency (M-TEC was added by the MUGEN division, called the "M1 package"). In a move echoing the many "firsts" introduced by the first generation Legend, the horsepower no longer complied with the self-imposed horsepower restrictions of the Japanese auto industry.^[8] The engine is capable of 300 PS (221 kW; 296 bhp).
Perhaps to accommodate the all wheel drive setup, the engine was reoriented from a longitudnal installation used since 1990, to a transverse installation, which was the original orientation of the first generation model. Honda began to expand the Acura division into Mexico, Hong Kong, and China. Plans to introduce the Acura brand in Japan haven't been formally announced, relying on speculation. This generation Legend shares large sedan duties with the Honda Inspire, known in North America as the Honda Accord starting with model year 2003 (series UC1) and continuing with the series CP3 sedan. September 15, 2005 saw a mild body restyle, which included a rear backup camera.The Akita and Kumamoto Prefectures adopted this Legend as the official car for local senior government officials.
The Legend received a Mid-Model Change (MMC) for the 2009 model year. Among the usual upgrades, the Honda Legend offered some additional optional safety features, including Lane Keeping Assistance System (LKAS). The LKAS could actually make small steering adjustments to keep a car in lane so long as the radius of the turn was more than 220 meters, which was the legal minimum in Japan. The LKAS would relinquish control at the slightest steering input so the driver had control at all times. Intelligent Night Vision with the world's first pedestrian detection feature, and a standard pop-up hood for pedestrian safety.^[9][10] The night vision system uses a separate heads up type display projected on the center bottom of the windshield. The infrared cameras do not require a light source, and the software is able to detect human like figures, surround the image with a red box and give audible caution tones. The pop-up hood uses a series of sensors that can detect a pedestrian-like object being thrown onto the hood. An actuator will pop the hood up at the rear, close to the base of the windshield, 10 cm (4 inches) to help minimize pedestrian injuries, especially head trauma. All markets feature energy absorbing hood and fender supports and deformable windshield wiper pivots to minimize pedestrian injury. Honda's internet-based navigation system Internavi is standard equipment on Japanese domestic vehicles.
In October 2010, it is reported that Brake Defect from Honda Honda Legend were delivered to customers before the problem is discovered. Honda says that it doesn’t know how many of its vehicles have suffered a faulty brake system. The U.S. Honda outfit says it will replace the faulty seal and, if leaking has occurred, the brake booster will be replaced as well. At least some owners in the UAE, Saudi Arabia and other GCC countries are likely affected. Honda told that no stop-sale is issued.^[11]

North American Acura Model

See Acura Legend and Acura RL for information on the North American model.

Reception

The second-generation 2005 Acura RL appeared on Car and Driver's Ten Best list for 2005. The car also garnered an CNET.com "Editor's Choice" Award for Top Tech Car.
The SH-AWD all-wheel drive system was lauded by Popular Science as one of the best automotive innovations of 2004, and earned the 2005 "Tech Car of the Year" from CNET.com.^[12] Subsequent moves by both Audi and BMW to design and market their own versions of torque vectoring all wheel drive systems bear out the innovative nature of the SH-AWD design.
While critically acclaimed, sales have not met expectations. Regarding sales of Japanese luxury flagships during the first six months of 2010, Acura has sold only 872 RLs, compared to 5,650 Lexus LS and 6,602 Infiniti M sedans. Enthusiasts and dealers said that the RL was not competitive because it is smaller, uses front-wheel drive, and lacks a V8 option, compared to its larger rivals in the mid-luxury segment that are rear-wheel drive and have a V8 available.^[13]
Some have suggested that the initial price of the RL is perceived to be out of its bracket. As the new RL offered more features and performance than the base version of its luxury competition's (i.e., the base six-cylinder BMW 5 Series),^[14] Honda Japan suggested that it could charge more, though Honda Canada disagreed. The RL's initial MRSP was $69,500 CAD, more than the six-cylinder BMW 525i and close to that of the V8-powered BMW 545i. At the RL's price point, most consumers expected a V8, furthermore they did not perceive Acura as being on par with its German rivals and expected more value from the Japanese marque. The damage from Honda Japan's alleged hubris was done, perhaps giving the RL an unfavorable impression that could not be removed, even though Honda Canada has since reduced the RL's price. In 2009, the new generation of the Acura TL was released and it is expected to offer tough competition to the RL, as the TL has essentially the same engine (but with 5 more horsepower), the SH-AWD system, similar dimensions, and many of the RL's features for only $44,900 CAD.^[15]
In October 2010, the Acura RL has been named as one of Consumer Reports^[16] most reliable cars, one of among 5 Honda models (Acura TL with front-wheel drive; Acura RL luxury car; Honda CR-V small SUV; Acura RDX small upscale SUV, and Honda Ridgeline compact pickup truck) named as most reliable in various categories.

Fifth generation (2014)

2013 Acura RLX Concept (Honda Legend)

Dealers have been promised an "amazing flagship" without intricate details, and a prospective RWD V8 model was scrapped in 2008. It is possible that it could become an Acura only model like the MDX which would allow more freedom in the development process. In 2013-2014 production will take place in Japan but will be built alongside the 2015 NSX in Ohio from 2015 on. One of these freedoms is the addition of a hybrid drivetrain. It has been common knowledge that Honda is working on a hybrid system optimal for V6 applications, albeit tuned for performance in Acura models in the same vein as the Lexus LS600h and the Infiniti M35h. The official specs are not yet available, but from what is currently known about the electric SH-AWD system is that it uses a 310 horsepower direct injection SOHC i-VTEC V6 with a 40 horsepower electric motor housed in the 7-speed iSHIFT II dual clutch automatic in the front, while the rear is powered by two 30-hp electric motors that use a "negative torque" feature in which when going into a turn the inside motor sails and the regenerated energy is fed to the already-vectored outside motor; the combined output is 385 horsepower and 455 lb. ft (62.5kgm) of torque. The styling is said to resemble a muscular, and up-sized version of the current car. The wheelbase will also stretch quite considerably to accommodate a BMW 7 Series size cabin while the length will also grow but to a lesser degree, giving the car less overhangs and more presence. Acura has stated the car will debut at the 2012 New York International Auto Show.
On April 4, 2012, Acura unveiled the RLX Concept, a replacement for the RL sedan, at the New York International Auto Show.[54] Production of the fourth generation Legend ended on June 16, 2012 at the Japanese facility to change over to the new Legend. On March 15, 2013 Honda Previewed The Upcoming World Version of The Honda Legend that will introduced in early of the year 2014

The list of honda prelude

First generation (1978–1982)

First generation (SN)
Overview
Production	1978–1982
Powertrain
Engine	1,602 cc EL I4 1,751 cc EK I4
Transmission	2-speed automatic 3-speed automatic 5-speed manual
Dimensions
Wheelbase	2,320 mm (91.3 in)
Length	4,090 mm (161.0 in)
Width	1,635 mm (64.4 in)
Height	1,290 mm (50.8 in)
Curb weight	900 kg (1,980 lb)

On November 24, 1978, the Prelude was launched.^[1] In Japan it was only available at the newly established dealership sales channel Honda Verno. This dealership chain also introduced the entry-level Honda Quint, the Honda Ballade, and the Accord-based Honda Vigor as its largest sedan and hatchback. The four-wheel independent struts, brakes, engine were all borrowed from the first generation Accord, but the chassis was all new and developed by chief engineer Hiroshi Kizawa expressly for the sporting Prelude.^[2] At 4,090 mm (length) x 1,635 mm (width) x 1290 mm (height), it had quite a low and wide profile. The wheelbase was 2,320 mm, and was 60 mm shorter than that of the original Accord.^[3] Honda appears to have followed the successful introduction of the Toyota Celica example originally established by the pony car originator Ford Mustang by taking a small car, like the Accord, installing a more powerful engine, and giving the body a short trunk, and a long engine hood. The Prelude (and period Accord) were the first cars under two litres to receive standard power steering.^[4]
The Prelude was the first Honda model to offer a power moonroof as standard equipment, which eventually became a Prelude trademark. In Japan, the Prelude was available with a sliding metal sunroof, while US versions received a glass top which freed up more headroom.^[2]
Initial reviews for the Prelude were favorable. "It is," wrote Brock Yates for Motor Trend, "by any sane measurement, a splendid automobile. The machine, like all Hondas, embodies fabrication that is, in my opinion, surpassed only by the narrowest of margins by Mercedes-Benz. It is a relatively powerful little automobile by anybody's standards."Motor Trend measuring an early Prelude completing the quarter-mile in 18.8 seconds at 70 mph.

Rear view of SN Prelude

The standard engine at the time of introduction was the "EL" SOHC eight-valve 1,602 cc (non-CVCC) inline four rated at 80 PS (59 kW) at 5,000 rpm and 12.9 kg·m (127 N·m; 93 lb·ft) at 3,500 rpm.^[1] It remained the only engine available for most markets, aside from the US and Japan. It featured a non-automatic choke with three positions and a two-barrel carburetor. In September 1978 the larger "EK" SOHC 12-valve 1,750 cc CVCC inline-four was introduced in Japan, rated at 90 PS (66 kW) at 5,300 rpm (SAE gross).^[1] Automatics had five less horsepower.^[3] It took until March 1979 for the Prelude to appear in the United States, then with 72 hp (54 kW) at 4,500 rpm and 94 lb·ft (127 N·m) at 3,000 rpm (SAE net) from the larger 1.8 engine.^[5] The EK engine made use of an engine oil cooler and transistor-controlled ignition system.
1980 saw the introduction of the CVCC-II engine which employed the use of a catalytic converter and several other refinements that improved driveability, the Prelude also received a mild facelift in 1981. Transmission choices were either the standard five-speed manual or initially a two-speed "Hondamatic" semi-automatic, which by October 1979 had been replaced by a three-speed automatic that used the final gear as the overdrive. In addition to the standard fabrics offered in most models, an 'Executive' option was offered in some markets which added power steering and Connolly leather upholstery. Honda used a single central gauge cluster design in this car which housed the speedometer and tachometer in one combined unit where both instrument's needles swept along the same arc. They also placed the compact AM/FM radio unit up high next to the gauge cluster. The Prelude featured intermittent wipers, tinted glass, and a remote trunk release. There was a convertible model introduced by a Santa Ana California company named Solaire. Less than 100 were believed to be converted when new and they were sold through Honda dealerships with full factory warranty coverage.

Second generation (1983–1987)

Second generation (AB, BA1/2/3/6, BB)
Overview
Production	1982–1987
Designer	Shinya Iwakura
Powertrain
Engine	1.8L 105 hp (80 kW) I4 2.0L 110 hp (82 kW) I4
Transmission	4-speed automatic 5-speed manual
Dimensions
Wheelbase	2,451 mm (96.5 in)
Length	4,374 mm (172.2 in)
Width	1,689 mm (66.5 in)
Height	1,295 mm (51 in)
Curb weight	1,046 kg (2,306 lb) - 1,340 kg (2,954 lb) (depending on model)

The second-generation Prelude was released in Japan on November 25, 1982 and worldwide in 1983. Riding on an all-new platform, the Prelude was initially available with an A18A or ET-2, 1.8 L 12-valve twin carburetor engine, producing 110 hp (77 kW), with fuel injection introduced in the "Si" models in 1985. In Japan, Asia and Europe, it was available with a 2-liter DOHC 16-valve PGM-FI engine (JDM = BA1, EU = BA2) although this engine was not released in Europe until 1986. The JDM B20A produced 160 PS (118 kW) at 6,300 rpm, while the European B20A1 produced only 137 hp (102 kW). This was the first generation of Prelude to have pop-up headlights, which allowed for a more aerodynamic front clip, reducing drag. Opening the headlights, however, especially at higher speeds, produced significantly more drag. The 1983 model is identifiable by its standard painted steel wheels with bright trim rings (although alloy rims were optional). The 1984-87 base models had Civic-style full wheel covers. In Canada, a "Special Edition" trim was created, which is essentially the same as the USA 2.0Si "sport injected" model.
In Japan, the Prelude was one of the key models sold at Japanese Honda dealership sales channels, called Honda Verno, which offered performance-oriented products. All Honda Verno products, like the Vigor, initially shared the concealed headlights introduced with this generation Prelude that would help identify "sports" products from Honda in Japan however, the approach was short-lived.
When the 2-litre 16-valve DOHC engine came out the hood was slightly modified since the larger engine could not fit under the original hood. The European version also saw slight modifications to the rear lights and revised front and rear bumpers which were now color-matched. Due to the fairly low weight of the car (1,025 kg or 2,260 lb) and high power (the 16-valve engine produced 160 PS or 118 kW), the car was relatively nimble in comparison to its competitors, which most Preludes had not been up to that time.

• 

  1986 Honda Prelude SE Rear
  
• 

  1986–1987 Honda Prelude Si coupé (Australia)
  
• 

  1986–1987 Honda Prelude Si coupé (Australia)
  

Third generation (1988–1991)

Third generation (BA3/4/5/7)
Overview
Production	1987–1991
Powertrain
Engine	2.0L 104 hp (78 kW) I4 2.0L 135 hp (101 kW) I4 2.0L 140 hp (104 kW) I4 2.1L 140 hp (104 kW) I4 2.0L 142 hp (106 kW) I4 2.0L 150 hp (112 kW) I4
Transmission	4-speed automatic 5-speed manual
Dimensions
Wheelbase	2,565 mm (101 in)
Length	4,460 mm (175.6 in) (1988-89) 4,511 mm (177.6 in) (1990-91)
Width	1,694 mm (66.7 in) (Japan) 1,709 mm (67.3 in)
Height	1,295 mm (51 in) (1988-89) 1,250 mm (49.2 in) (1990-91)
Curb weight	1,060 kg (2,337 lb) - 1,340 kg (2,954 lb) (depending on model)

On April 9, 1987, the third-generation Prelude was released in the Japanese domestic market and released later that year worldwide, being an 1988 model in North America. Featuring evolutionary styling from its predecessor, it shared design cues from the Honda NSX that would be introduced later in 1989. The Prelude featured innovative features for its time such as a 0.34 drag coefficient, roof pillars made of high-strength metal and its signature feature, the available option of the world's first mechanical four wheel steering system available in a mass-production passenger car.
The third-generation Prelude was exclusively powered by variants of the Honda B20A engine, a base carbureted version with a SOHC 12-valve valvetrain, or a DOHC variant with Honda's PGM-FI fuel injection and 16 valves.

Third-generation Honda Prelude engines: B20A/B20A1 - 2.0L DOHC PGM-FI 143/160 hp (Japan/Europe) B20A3 - 2.0L SOHC 12v carb 104 hp North America B20A4 - 2.0L SOHC 12v carb Global, except North America B20A5 - 2.0L DOHC PGM-FI 135 hp (101 kW) North America B20A6 - 2.0L DOHC PGM-FI 142 hp (106 kW) Oceania B20A7 - 2.0L DOHC PGM-FI 150 hp (110 kW) Europe B20A8 - 2.0L DOHC PGM-FI 133 hp (99 kW) Europe B20A9 - 2.0L DOHC PGM-FI 140 hp (100 kW) Europe B21A - 2.1L DOHC PGM-FI 145 hp (108 kW) Japan (SI States) B21A1 - 2.1L DOHC PGM-FI 140 hp (100 kW) North America

In 1987, Road & Track published a test summary that shows the 1988 Honda Prelude 2.0Si 4WS outperforming every car of that year on the slalom, with a speed of 65.5 mph (105.4 km/h), even besting exotics such as Porsche and Ferrari. For reference, the 1988 Chevrolet Corvette C4 took the same course at 64.9 mph (104.4 km/h).
The Prelude was Wheels magazine's Car of the Year for 1987.

Mid-cycle refresh and Prelude INX

Rare 1990 SiStates Prelude

The facelifted third-generation Prelude was revealed in Japan on November 21, 1989. Along with the facelift, a new Prelude model was introduced to the Japanese domestic market, the Prelude INX, which featured fixed headlights and a front fascia very similar to the contemporary Honda Legend coupé. The facelift coincided with changes to North American lighting requirements in the United States and Canada, and a greater focus on safety was offered with available anti-lock brakes and an available driver's side airbag exclusively offered on Japanese models.
The front bumper on the revised Prelude was also changed to feature clear indicators and a revised parking lamp design. Many of the interior parts were revised, including the dash bezel, the door handle and window switches. The Japanese version of the Si with the B20A was rated 140 HP with the JDM engine and was rated for 37 MPG.
A new engine was offered, a revised version of the B20 called the B21A1, bored to 83 mm (3.3 in) with a total displacement of 2056 cc producing up to 145 hp (108 kW) and featuring a unique cylinder liner featuring FRM (fiber reinforced metal) that is reported to be extremely tough. This causes premature piston ring wear contributing to exceptionally high oil consumption.
In North America, the facelifted Prelude debuted for the 1990 model year, with the carbureted 2.0S being discontinued. The fuel-injected 2.0Si became the entry-level Prelude model, being supplanted by a new Si model with the B21A1 engine, offering 4WS or ABS (called ALB) as options.
Honda released the Prelude SiStates in 1990 as a Japanese domestic market special edition, this car was a limited production run and very few were built. It featured four-wheel steering, ABS, limited slip differential, a leather-wrapped steering wheel and gear lever, extra sound deadening on the firewall and hood, rear windscreen wiper and washer, and many more features that were usually options. It also featured a unique B21A engine rated at 145 bhp (108 kW) that was only produced for the SiStates. A major distinction of the SiStates is that it was the same width as the Prelude sold in North America, in which it took its name from. This Prelude model was only available with an automatic transmission.

• 

  90-91 Front bumper
  
• 

  88-89 Rear bumper and tail lights
  
• 

  90-91 Rear bumper and tail lights
  

Fourth generation (1992–1996)

Fourth generation (BA8/9, BB1-BB4)
Overview
Production	1991–1996
Powertrain
Engine	see chart
Transmission	4-speed automatic 5-speed manual
Dimensions
Wheelbase	2,550 mm (100.4 in)
Length	4,440 mm (174.8 in)
Width	1,765 mm (69.5 in)
Height	1,290 mm (50.8 in)
Curb weight	1,288 kg (2,840 lb)

On September 19, 1991, the fourth-generation Prelude was introduced in Japan, and released worldwide for the 1992 model year. The car had a 58% front and 42% rear weight distribution. The four wheel steering system was changed to an electronic version and the engine was increased in capacity from 2.1 litres to 2.2 litres for the base model "S" (SOHC F22A1 engine, 125 PS (92 kW; 123 hp) at 5200 rpm, 193 N·m (142 ft·lbf) at 4000 rpm) and "VTEC" model (DOHC VTEC H22A1, 190 PS (140 kW; 187 hp) at 6800 rpm, 207 N·m (153 ft·lbf) at 5500 rpm), with a 2.3-litre for the "Si" (DOHC H23A1, 160 PS (118 kW; 158 hp) at 5800 rpm, 212 N·m (156 ft·lbf) at 5300 rpm). The Japanese Si came with the F22B (2.2 L DOHC non-VTEC, 160 PS (118 kW; 158 hp)). The VTEC model had an upgraded brake system, going from a 10.3" (262 mm) front rotor to an 11.1" (282 mm) front rotor and utilizing larger brake caliper and pads, similar to those found in the Honda Vigor. Its styling approach is similar to the Honda Ascot Innova during the same time period.
Additionally, a 2.0i, single overhead cam (SOHC) model was released in Europe, rated at 133 PS (98 kW; 131 hp). 1993 was the last year that the "Si-VTEC" (BB4) name was used, and beginning in 1994 it was shortened to just "VTEC" and stayed that way throughout the rest of the generation. In some countries, the Prelude with 2.2 VTEC engine was called the VTi-R. Later the 96 prelude SI/SR was introduced with a 2.3 VTEC engine. In Canada, the Si was called the SR, and the VTEC was called the SR-V. Due to the width dimensions and the engine displacement exceeding Japanese government regulations for vehicles classified as "compact", this generation Prelude obligated Japanese owners to yearly taxes, and the Prelude became known as a luxury car in Japan as a result.
This model also marked the end for the pop-up headlights. The 1992 Prelude incorporated other design features that had also become the "Prelude standard". The rear end was rounded and fairly high in comparison to the previous square trunk line. The front fascia of the car became wider with fixed headlights. The glass moonroof made way for a steel sliding sunroof which no longer retracted into the car but extended out and over it.
The light blue back lighting introduced in the third generation was continued. Later models (1994 and on) also featured translucent speedometer and tachometer needles. All VTEC & SE models received leather interior. In Japan, there was also an in-dash television set available as an option. As a result of this, many enthusiasts have modified the dashboards of their Preludes to fit a small television set. Also featured was an 8-speaker audio system (Gathers DSP 8 Speaker System) which included a center dash-mounted speaker and rear center subwoofer, while the U.S. version received only 7 speakers (center dash speaker not included). The Japanese version also included a digital climate control system. The Canadian version received some options which were not available in the United States. For instance, the Japanese Prelude had power folding mirrors as well as a rear windscreen wiper, while the Canadian market was the one to have heated mirrors and optional heated seats. The Japanese model came with optional Honda Access accessories such as Typus ski racks, under dash lights, headrest covers, a cabin air filter, and floor mats. Some of the Japanese domestic market fourth generation Prelude VTECs did not come with options such as a sunroof and 4-wheel steering, as it was possible to skip these options when buying in Japan. The fourth generation Prelude also shares some suspension components with the fifth generation (1994–97) Honda Accord. It also shares many suspension components with the 5th generation Prelude's that are not equipped ATTS system.
Models and markets chart:

Model	Engine			Steering	Chassis code	Markets
	Code	C/R	Power			Japan	USA	Canada	Europe	Australia
Si	F22B	9.5:1	160 PS	2WS	BA8
				4WS	BA9
Si VTEC	H22A	10.6:1	200 PS	2WS	BB4
				4WS	BB1
S	F22A1	8.8:1	133 PS	2WS	BA8
Si	H23A1	9.8:1	160 PS	2WS	BB2
				4WS	BB2
SE (1995)	H23A1	9.8:1	160 PS	2WS	BB2
VTEC (93-96)	H22A1	10.0:1	190 PS	2WS	BB1
Prelude	F22A1	8.8:1	133 PS	2WS	BA8
SR	H23A1	9.8:1	160 PS	2WS	BB2
				4WS	BB2
SR-V (93-96)	H22A1	10.0:1	190 PS	2WS	BB1
2.0i	F20A4	9.5:1	133 PS	2WS	BB3
2.3i	H23A2	9.8:1	160 PS	2WS	BB2
				4WS	BB2
2.2i VTEC (93-96)	H22A2	10.0:1	185 PS	2WS	BB1
				4WS	BB1
CV/S	F22A1	8.8:1	131 PS	2WS	BA8
Si	H23A1	9.8:1	160 PS	4WS	BB2
SRS (91-93)	H23A1	9.8:1	160 PS	4WS	BB2
VTi-R (94-96)	H22A1	10.0:1	190 PS	4WS	BB1

Honda Prelude generation 4 image gallery

• 

  Modified 1994 Prelude VTEC
  
• 

  1994 Prelude VTEC
  
• 

  1993 Prelude Si
  
• 

  1992 Prelude S
  

Fifth generation (1997–2001)

Fifth generation (BB5-BB9)
Overview
Production	11/1996–04/2001
Powertrain
Transmission	4-speed automatic 5-speed manual
Dimensions
Wheelbase	2,586 mm (101.8 in)
Length	4,521 mm (178 in)
Width	1,753 mm (69 in)
Height	1,316 mm (51.8 in)
Curb weight	1,380 kg (3,042 lb)

Introduced on November 7, 1996, the fifth generation retained a FF layout with an independent front suspension and 63/37 weight distribution. Most fifth-generation Honda Preludes came with 16-inch (410 mm) aluminium alloy wheels with all-season 205/50 R16 87V tires. The 2.0i and JDM Si trims came with 195/60 R15 88H, and the JDM Xi came with 14" steel wheels. Unlike the US market Preludes, JDM Preludes came with rear wind screen wipers, except for the Xi. Most Prelude models now featured the 11.1" front brakes that the '96 VTEC model came with, and most Preludes also received a 5-lug hub, as opposed to the 4-lug wheel hub of older models.
The fifth-generation Prelude marked a return to the more square body style of the third generation (1988-1991), in an attempt to curb slumping sales of the fourth-generation body style. All models and trim packages stayed within the BB-chassis code (BB5-BB9) and housed either an H-series or F-Series engine:

Model	Engine			Steering	Chassis code	Markets
	Code	C/R	Power			Japan	USA	Canada	Europe	Australia
SCoupe	F22B	8.8:1	135 PS	2WS	BB5
Si	F22B	9.2:1	160 PS	2WS	BB5
				4WS	BB7
SiR	H22A	10.6:1	200 PS	2WS	BB6
				4WS	BB8
SiR S-spec	H22A	11.0:1	220 PS	2WS	BB6
Type S	H22A	11.0:1	217 PS	2WS	BB6
Base	H22A4	10.0:1	200 PS	2WS	BB6
Type SH	H22A4	10.0:1	200 PS	2WS	BB6
SE	H22A4	10.0:1	200 PS	2WS	BB6
2.0i	F20A4	9.5:1	133 PS	2WS	BB9
2.2 VTi	H22A5 (97-98) H22A8 (99-01)	10.0:1 11.0:1	185 PS 200 PS	2WS	BB6
				4WS	BB8
2.2 VTi-S	H22A5 (97-98) H22A8 (99-01)	10.0:1 11.0:1	185 PS 200 PS	2WS	BB6
Si	F22Z6	10.0:1	160 PS	2WS	BB5
VTi-R	H22A4 (97-98) H22Z1 (99-01)	10.0:1	200 PS	2WS	BB6
ATTS	H22A4 (97-98) H22Z1 (99-01)	10.0:1	200 PS	2WS	BB6

Type S

1997–2001 Honda Prelude VTi-R ATTS, Australia

One version of the fifth generation Prelude, a high-performance model called the Type S, was only available in Japan. It was equipped with the 2.2 L H22A, featuring VTEC and producing 217 hp (162 kW; 220 PS) at 7,200 rpm and 163 lbf·ft (221 N·m) at 6,500 rpm. With a compression ratio of 11.0:1, 87.0 mm (3.4 in) bore x 90.7 mm (3.6 in) stroke and VTEC-valve timing, lift and duration were adjusted to 12.2 mm (0.5 in) intake and 11.2 mm (0.4 in) exhaust. Honda also overhauled the air box and replaced it with a more efficient design that is often referred to as Dynamic Chambering, along with a larger throttle body design bored to 62 mm (as opposed to the previous 60 mm). The exhaust system was also treated to a redesign, with the pipe cross sections becoming more cylindrical rather than oval. The three-way catalytic converter was also increased in size, as well as the exhaust piping from 2 to 2¼ in (51 to 57 mm) (tToV). In addition to a higher output engine both Type S and USDM Type SH featured an overhauled front suspension layout which offered a more effective camber curve. The fifth generation curb weight was 1,310 kg (2,880 lb), and ground clearance was 140 mm (5.5 in)^{[citation needed]}. Unlike the SiR S-spec that had an LSD, the Type S acquired the Honda technology known as the Active Torque Transfer System (ATTS). The gearing on the Type S matches all other fifth-generation Preludes that had a manual transmission except for the five-speed 2.2 VTi VTEC and had a final drive ratio of 4.266:1. The Type S had an Active Control ABS system, different from the others which had the standard ABS systems. The interior featured newly developed Carbon and Excene upholstered seats which most people see it as leather and alcantara laced with red stitching. Manufacturer styling options included seat lettering. The exterior styling of fifth generation Preludes was standardized for most models. All had a sunroof except for the Type S model.